Vacuum / Collector Attachment

TBD: Add make and model

Specifications

Uses

• Collecting grass clippings after mowing
• Leaf collection in autumn
• Light debris cleanup
• Paddock cleanup

Pre-Use Checks

1. Empty hopper if not already empty
2. Check hopper bag/screen for tears
3. Inspect intake hose/chute for blockages
4. Check fan/impeller (if accessible)
5. Check PTO shaft and guards
6. Ensure all guards in place

Attachment Procedure

See general attachment procedure, plus:

TBD: Add specific connection instructions

Operation

1. Attach to tractor following procedure
2. Start tractor, engage PTO
3. Drive slowly over material to collect
4. Monitor hopper fill level
5. Empty when full (don’t overfill)

Operating Tips

• Best results on dry material
• Wet grass/leaves will clog - avoid if possible
• Make overlapping passes
• Slow down for heavy debris
• Stop immediately if unusual noise/vibration

Efficient Collection

For best results, mow first with the mower then follow up with the vacuum in a separate pass.

Emptying the Hopper

TBD: Add specific emptying procedure

General steps:

1. Disengage PTO
2. Position over dump area
3. Release hopper / raise to empty
4. Check hopper is fully empty
5. Close/lower hopper securely

Disposal

• Grass clippings: Compost area at TBD
• Leaves: Compost or leaf mould pile at TBD
• Mixed debris: TBD

After Use

1. Empty hopper completely
2. Disengage PTO and turn off tractor
3. Clear any debris from intake
4. Check for damage or wear
5. Clean exterior if needed

Maintenance

Troubleshooting

Storage

• Empty and clean before storage
• Store under cover
• Check for mouse/pest nests before first use of season
• Location: TBD