Tractor Attachments

Implements and attachments for the farm tractor.

Attachment Safety

Always ensure the tractor is off and the PTO disengaged before attaching or detaching implements. Follow the connection procedure carefully.

Available Attachments

Mower Attachment

For cutting grass and maintaining paddocks.

Collector Attachment

For collecting leaves, grass clippings, and debris.

General Attachment Procedure

Connecting an Attachment

1. Park tractor on level ground
2. Turn off engine and remove key
3. Lower 3-point hitch to lowest position
4. Align attachment with hitch points
5. Connect lower arms first, then top link
6. Adjust top link length as needed
7. Connect PTO shaft (if required)
8. Connect hydraulic lines (if required)
9. Raise attachment and check security

Disconnecting

1. Lower attachment to ground
2. Turn off engine and remove key
3. Disconnect PTO shaft
4. Disconnect hydraulic lines (relieve pressure first)
5. Remove top link, then lower arms
6. Drive tractor away slowly

PTO Operation

PTO Hazard

PTO shafts spin at high speed and can cause fatal entanglement injuries. Never approach a spinning PTO. Always disengage and wait for complete stop.

• Standard PTO speed: 540 RPM
• Always use PTO guard/shield
• Check attachment is rated for tractor PTO

Storage

• Store attachments under cover when possible
• Grease connection points before storage
• Location: TBD

Related

• Tractor Operation Guide