Strimmer / Brush Cutter

TBD: Add make and model

Specifications

Spec	Value
Make/Model	TBD
Type	Petrol / Electric / Battery
Fuel mix	TBD (if petrol)
Line diameter	TBD
Storage location	TBD

Required PPE

• Safety glasses or face shield
• Hearing protection
• Steel-capped boots
• Long trousers
• Gloves

Pre-Use Checks

1. Check fuel level (or battery charge)
2. Inspect cutting head and line
3. Check guard is secure
4. Inspect shaft and handles for damage
5. Test throttle and kill switch

Operation

Starting (Petrol)

1. Set choke (if cold)
2. Prime fuel (if equipped)
3. Hold firmly, pull starter
4. Adjust choke as engine warms

Cutting Technique

• Swing in smooth arc, right to left
• Keep cutting head parallel to ground
• Let line do the work - don’t force
• Overlap passes slightly
• Keep guard between you and debris

Around Obstacles

Debris Hazard

Strimmers throw debris at high speed. Clear area of loose stones, glass, and other projectiles before starting. Keep others at safe distance.

• Use tap-and-go to feed line as needed
• Work around trees/posts carefully
• Avoid contact with hard surfaces (wears line quickly)

After Use

1. Turn off and let cool
2. Clean cutting head of debris
3. Check line length, replace if needed
4. Clean air filter (petrol models)
5. Store safely

Maintenance

Task	Frequency
Replace line	As needed
Clean air filter	After each use
Check spark plug	Monthly
Replace cutting head	When worn

Troubleshooting

Problem	Possible Cause	Solution
Line breaks often	Line too thin	Use correct diameter
	Hitting hard objects	Improve technique
Poor cutting	Line too short	Feed more line
	Wrong line type	Use correct line
Engine bogs down	Air filter clogged	Clean filter
	Old fuel	Replace with fresh mix

Storage

• Store hanging or upright
• Drain fuel for long-term storage
• Location: TBD